Not spring colour, but some infra red images from a roll taken whilst I was at college….circa 1980. They came to mind after a conversation this morning. Requiring the old E4 process, which was pretty much obsolete, even then, it was a bit of a palava to use. And expensive. But turning anything containing chlorophyll bright red, it was interesting to play with.
Woodland, Moat Mount
Woodland, Moat Mount
Bishops Park near Putney Bridge
Churchyard, Bishops Park near Putney Bridge
After my brief flirtation with a Leica M6, a set of test shots taken on a quick walk along the Thames between Chiswick and Kew Bridges last week. These are shop scans put through Lightroom. They have more jpg artifacts than you can shake a stick at, along with a very generous helping of sharpening from the person who scanned them, but they’re ok for reference.
Verdict…would I buy one? I’ll have to flip a very expensive coin on that!
The first walk I’ve done in a while…..
Some recent sketch ideas from a walk I regularly take:
Earlier in the year I visited the Monet Gardens at Giverny to photograph the waterlillies. Prior to the shoot, I was asked to make some test shots for a few ideas I had, and these are the results. Shot at my local, Kew, the ideas weren’t adopted in the end, but a few days ago I finally made some high res scans.
I love using square format. Unfortunately most art directors worry when you mention it. To fit a page, a crop is almost inevitable, making its use irrelevant. And why shoot a beautful garden in black and white? The area around the lake at Giverny is green. And then there is a lot more green, which is not surprising really, as it’s largely a woodland type planting. There are occasional splashes of colour, but I wanted to capture the tonality. My darkroom instincts come to the fore in these situations!
Colour was eventually decided on and I shot some lovely graphic images – once these have been published next spring, I’ll post these too. And waterlillies – they’re absolute devils. If they decide to open, it’s a long wait. I timed one and it took 2 hours and 15 minutes. I’d normally have better things to do than standing around with a stop watch, but when you are planning a ferry trip home, it was essential. But worth the wait!
water lilies at Kew Gardens
water lilies at Kew Gardens
water lilies at Kew Gardens
roots in glasshouse at Kew Gardens
Some additions to the Coast of Light series I started a couple of years ago. Taken with my Fuji 6×4.5cm, the films and lo res scans arrived this morning. I quite like them as they are, as the colour is slightly muted, but I will make high res scans when time allows.
Sevilla, Parque Maria Luisa
Cadiz
Sevilla, Parque Maria Luisa
Conil, Spain
Conil, Spain
Cadiz
Sevilla, Parque Maria Luisa
Cadiz
Cadiz
Cadiz
Sevilla, Parque Maria Luisa
Sevilla, Parque Maria Luisa
Last week the printer and photographer, Jack Lowe, added a new posting to his blog about Calotype printing. He has been experimenting with digital negatives suitable for old print processes, and has collaborated with photographer Richard Freestone in producing two prints using the Calotype process. This struck a chord with me. During the late 1990’s, I spent a long time in my darkroom working with similar techniques. My particular interests were gum bichromate and Kallitype printing.
These are contact printing processes, which require negatives the same size as the final print. The sensitized paper with the negative on top is exposed to light before developing in the required solution. In the case of gum bichromate, this is water.
A quick glossary:
Kallitype – a suitable paper is first coated with a solution of ferric oxalate and silver nitrate.
Calotype – a suitable paper is coated with a solution of weak salt solution, dried, then brushed with a weak silver nitrate solution, dried, making silver chloride. Fox Talbot used this process and he referred to it as the Talbotype.
Gum bichromate – a suitable paper is coated with a solution of gum bichromate mixed with water colour pigment.
Kallitypes and Calotypes may at first glance appear very similar, as they can have a similar red-brown hue.
Richmond lock on River Thames - Kallitype print 1998
When I made my Kallitypes, I masked the negatives to create a clean straight line edge to the print. This was due to my coating method. With Jack’s prints, a brush is used and the brush marks are left in the final images. Jack said,”It’s as if someone’s come along with a magic brush and painted the image onto the paper!”. With some of the gum bichromate images below, I used this brush technique, and have included the edges in the final print.
fritillaria meleagris - gum bichromate print 1998
With gum prints, I nearly always printed three layers of colour to build up density. This means you have to be accurate with registering the negative over the image with the subsequent layers. The whole process, with paper preparation would take around five days. The paper had to be left to dry and shrink properly before applying a new coat of sensitizer, otherwise it would be bigger than the negative, causing registration problems.
Although I think the effect can be beautiful, it made the art directors I showed the images to flinch! The time it took made them nervous. I remember showing these to the art director of Gardens Illustrated in 1998, who complimented the prints highly. But she said that, “Unfortunately the editor would not allow gratuitous flower images to be used in the magazine”. Oh well!
lavender - gum bichromate print 1998
chrysanthemum - gum bichromate print 1998
It’s unlikely that I will be returning to these particular processes in the near future. My darkroom was replaced by a digital studio in 1999. But I do hope to work with Jack soon in producing some photogravure or polymer gravure images using his digital negatives. See my posting from last year. Perfecting and understanding the use of the printing plates has taken slightly longer than I hoped, but I would expect to have some images to show in the next few months.
Parrot tulip - gum bichromate print, 1998
Just after Christmas I received an email asking me to donate a signed print for a silent auction. I often get email requests, and an awful lot appear to me as scams. But this one had something genuine about it and, after a few enquiries, it turned out to be students raising money for the photography degree show at The Arts University College at Bournemouth. So I sent them a print. This week I received an email saying it had sold for £350, contributing to the £4000 raised, which is nice to know! Their show is called “Paradalia” and will run from early Summer 2011. And this is the image I sent.
beech trees, Gunnersbury Park, London
The instructions from Polaroid issued after the song by OutKast suggested you shouldn’t really shake your valuable instant photographs as they developed. In fact shaking is more likely to cause damage. So however energetic you feel, gently place each picture on a flat surface …..and watch it, watch it!
Apparently the idea of shaking your print came from using the old peel-apart material which had a damp surface immediately after developing. Shaking the prints helped them to dry – or so the say.
Yesterday I went to Kew Gardens to test my latest photographic acquisition, a Polaroid 320 camera. After much searching online, I had found some old 669 peel-apart film, which was seven years out of date. As it’s not made anymore, it’s hard to come by. It was a bit slow, and the prints had a very strong blue cast too, but I suppose this is the fun of it. And did I shake them? Yes!
So a few examples.
Palm House Kew Gardens - 669 Polaroid print
Palm House Kew Gardens - 669 Polaroid print
Palm House Kew Gardens - 669 Polaroid print
Palm House Kew Gardens - 669 Polaroid print
Palm House Kew Gardens - 669 Polaroid print, with the classic fault where the chemical gel fails to spread evenly over the print.
Just before Christmas I tried out another Polaroid camera, this time shooting SX-70 film. This you definitely didn’t shake. In fact it is so sensitive, it needed to be covered with black card as it was ejected from the camera to protect it from the light – then placed in my camera bag for at least five minutes. A complete P.I.T.A! Interesting results though.
'Palm House 1' Kew Gardens - SX-70 print
'Palm House 2' Kew Gardens - SX-70 print
'Palm House 3' Kew Gardens - SX-70 print
'Palm House 4' Kew Gardens - SX-70 print
'Palm House 5' Kew Gardens - SX-70 print
'Palm House 6' Kew Gardens - SX-70 print
Strange how with the passage of time you start to look back with rose tinted spectacles. Three times over the last week I have had conversations about missing the routine of hanging round a film lab after a shoot. For me it was pretty much a daily occurrence, though at the time, I saw it as a real inconvenience.
The last E6 film I had processed was on 21st December 2004. I remember the shoot vividly. A freezing cold day at the Top Gear test track at Dunsfold. Forward 24 hours and a phone call from my lab… “There’s a problem with your action shots”. “Are they a bit dark?” I asked. “No, only about four shots have come out on each roll”.
I immediately left the Christmas party I was at and headed to the lab in Richmond. Three rolls of film were on the lightbox. Most frames had just half a car. Shutter failure. My trusty 14 year old EOS 1 had finally given up. The final straw. Digital beckoned.
Even Steve the E6 manager, who was part magician, part agony aunt, couldn’t help. He was usually there to reassure me with a cup of coffee. “Push that half a stop and it will be fine,” he would say. And he would be right. I frequently ran clip tests – a couple of frames cut off and processed for assessment before running and correcting the remainder of a roll. (See below). Not even he could work his magic this time.
Audi at Top Gear Test Track, Dunsfold
Luckily there were enough useable photographs to salvage the job, which required action images to run over a DPS. More fortunately, I had used another camera for the rest of the shoot, so nothing else was effected.
Rose tinted spectacles? I went back into a pro lab for the first time for many years last summer. The slightly sweet smell of the warm chemistry, combined with filter coffee did bring back some fond memories. I suppose the time spent at a lab was a debrief session, where you caught up and gossiped with other snappers. This still happens, but in isolation, like much communication now, via email or Twitter. So would I really turn the clock back? No. For a lot of things, digital is too good.